Negative Images ~ These images were produced originally, this happens by the pinhole camera itself. This means that the images come out negative and back to front. Because the light turns everything around and switches everything about.
Positive Images ~ Getting positive images is abit of a long process. You have to dry your images out, scan them into your area and switch them around on photoshop. Or whatever editing software you use. And you can do this by simply, going on to photoshop, getting your negative image up. Clicking on image ---> Image rotation and make it go on to horizontal to turn the photo the right way round. Then you go back onto Image ---> Adjustments and click on invert, and it turns your image from negative to positive. And hopefully it comes out just aswell as it looks negative. Sometimes, images just don't take properly, and look far to dark so you can't see the detail, and most of the time you cannot tell the detail when it is to bright aswell. However, sometimes when the images are in negative still, the image looks alot more clear, rather than turning them into positive images and looking too dark, or no detail.
Wednesday, 19 October 2011
Pinhole Cameras Info.
A pinhole camera is a simple camera which is just made out of a light proof box and a small aperture. It is just simply a box with a hole in the front or the side. When the camera is out, you should have in your box a sheet of photographic paper oppostite to the small hole in the box. The small hole in the box is where light enters and projects on to your piece of photographic paper. Therefore when the image is complete and has been out for the certain amount of time you decided on. By calculating the time with the brightness of the day. The equation you can do for this is finding the focal length and by doing that you can measure the focal length which is the width of the box in which you have chosen. After you have chosen this you will do your length. E.g. For my pringle tin the measurement was 74mm i devided this from the brightness of the day which was 0.8. So 74mm / 0.8 and that came to 92.5. So we decided to time the light exposure outside for at least 25 seconds too see how the exposure came out. Also the F-stop in this camera was F=90.
Darkroom ~ The techniques in the darkroom, you always need the light off obviously, and after that you need to leave your image in the first solution for at least two minutes to wait for it to develop properly. Secondly, you move your image into the next solution in which you leave in there for around 30 seconds. Lastly, you move your image into the final solution, which fixes your image. And cause the image not to fade. At first you leave it in there for about ten seconds, then you fix it for five minutes.
How cameras work ~ In photography, a shutter is a device that allows light to pass through and keep light out when you don't want it to enter. Also, it captures a permanent image of a scene.
In optics, an aperture is the hole/ opening which the light travels through. In photography this can be measured in increments called F-Stops.
The lens of the camera captures the light from the subject and brings it to a focus in the film.
The size of the aperture and the brightness of the scene controls the amount of light that enters the camera during a period of time, the shutter controls the length of time that the light hits the recording surface. Equivalent exposures can be made with a larger aperture and a faster shutter speed or a corresponding smaller aperture and with the shutter speed slowed down.
Darkroom ~ The techniques in the darkroom, you always need the light off obviously, and after that you need to leave your image in the first solution for at least two minutes to wait for it to develop properly. Secondly, you move your image into the next solution in which you leave in there for around 30 seconds. Lastly, you move your image into the final solution, which fixes your image. And cause the image not to fade. At first you leave it in there for about ten seconds, then you fix it for five minutes.
How cameras work ~ In photography, a shutter is a device that allows light to pass through and keep light out when you don't want it to enter. Also, it captures a permanent image of a scene.
In optics, an aperture is the hole/ opening which the light travels through. In photography this can be measured in increments called F-Stops.
The lens of the camera captures the light from the subject and brings it to a focus in the film.
The size of the aperture and the brightness of the scene controls the amount of light that enters the camera during a period of time, the shutter controls the length of time that the light hits the recording surface. Equivalent exposures can be made with a larger aperture and a faster shutter speed or a corresponding smaller aperture and with the shutter speed slowed down.
Photo genres.
Testino
Fashion photography.
Fashion photography.
Testino has become one of the world's most well known and celebrated fashion photographers. His work has been featured across the globe in magazines such as Vogue, Vanity Fair and V and he has crafted and contributed to the imagery of leading fashion houses such as Burberry, Gucci, Versace, Calvin Klein, Dolce & Gabbana, Salvatore Ferragamo, Estee Lauder, Hugo Boss, Miu Miu, Shiseido and Michael Kors, among many others. As well as having published nine books of his work and edited one other dedicated to contemporary art and artists from his native Peru, Mario Testino has had many successful exhibitions in galleries and museums around the world.
Photo genres.
Adam Burton
Landscape Photography
Adam Burton is one of the UK 's leading landscape photographers and author of four books. Since 2008 he has been working as a full time professional landscape photographer, regularly supplying imagery and undertaking commissions for a wide range of business clients. He has photographed five of the seven continents and now specialises in the landscapes of the UK , particularly Southwest England .
Landscape Photography
Health & Safety
~ No Bags or equipment left around in and out of the dark room - You can't see clearly and may trip.
~ Strictly no food or drink - Incase of a spill, or sticky hands etc.
~ No running - You cannot see what you are doing properly because of the dimmed lights, and may slip and fall.
~ Keep the safety fire door locked - So light dosen't enter the room, also because it is only needing to be opened incase of emergency.
~ Spilling liquid - If you do not clean it up, it may harm someone.
~ Rotating door - Tap on the door before you go through, to let others know you are coming through.
~ Strictly no food or drink - Incase of a spill, or sticky hands etc.
~ No running - You cannot see what you are doing properly because of the dimmed lights, and may slip and fall.
~ Keep the safety fire door locked - So light dosen't enter the room, also because it is only needing to be opened incase of emergency.
~ Spilling liquid - If you do not clean it up, it may harm someone.
~ Rotating door - Tap on the door before you go through, to let others know you are coming through.
Pinhole photographs
I prefer the photo in negative rather than positive, Although the picture is very light in the negative photo, i find that it shows more detail in the actual picture its self. More over the positive photo, is just too dark, therefore it looking too dark and us not being able too see as much detail as there was in the negative.
Pinhole photographs
Pinhole photographs
This photo, didn't come out aswell as it should of, i think the reflection of the window and the bars on the 3rd floor in the atrium reflected, and the pinhole camera was left too long. So this isnt one of the best. It was too dark in negative and too light in positive.
Pinhole photographs
Here, i am inside the Atrium and taking and image from the 2nd floor, to try and capture a clear image, i have left the camera for about 2 minutes. As indoors the light isnt as clear, therefore we had to leave it longer to develop.
Pinhole photographs
Changed from negative to positive, i left my camera outside for roughly about 25 seconds. Therefore, making a good image come out in negative aswell as positive. By changing it to positive, it has come out very light and makes the image look pretty old fashioned.
Pinhole photographs
Here are the pinhole images, for before and after, the negative is the top photo, and i have simply switched the photo around and turned it into positive. It is a clear photo and has a good view of the building.
Subscribe to:
Posts (Atom)












