A pinhole camera is a simple camera which is just made out of a light proof box and a small aperture. It is just simply a box with a hole in the front or the side. When the camera is out, you should have in your box a sheet of photographic paper oppostite to the small hole in the box. The small hole in the box is where light enters and projects on to your piece of photographic paper. Therefore when the image is complete and has been out for the certain amount of time you decided on. By calculating the time with the brightness of the day. The equation you can do for this is finding the focal length and by doing that you can measure the focal length which is the width of the box in which you have chosen. After you have chosen this you will do your length. E.g. For my pringle tin the measurement was 74mm i devided this from the brightness of the day which was 0.8. So 74mm / 0.8 and that came to 92.5. So we decided to time the light exposure outside for at least 25 seconds too see how the exposure came out. Also the F-stop in this camera was F=90.
Darkroom ~ The techniques in the darkroom, you always need the light off obviously, and after that you need to leave your image in the first solution for at least two minutes to wait for it to develop properly. Secondly, you move your image into the next solution in which you leave in there for around 30 seconds. Lastly, you move your image into the final solution, which fixes your image. And cause the image not to fade. At first you leave it in there for about ten seconds, then you fix it for five minutes.
How cameras work ~ In photography, a shutter is a device that allows light to pass through and keep light out when you don't want it to enter. Also, it captures a permanent image of a scene.
In optics, an aperture is the hole/ opening which the light travels through. In photography this can be measured in increments called F-Stops.
The lens of the camera captures the light from the subject and brings it to a focus in the film.
The size of the aperture and the brightness of the scene controls the amount of light that enters the camera during a period of time, the shutter controls the length of time that the light hits the recording surface. Equivalent exposures can be made with a larger aperture and a faster shutter speed or a corresponding smaller aperture and with the shutter speed slowed down.
No comments:
Post a Comment